|
Products
Leister hot air blower Hotwind
 Leister
hot air blower is available in four different capacities. Namely, Leister heater
700 (temperature electronically controlled up to 600 C), Leister heater Labo
34 (without electronics), Leister hot are blower Vulcan E (temperature electronically
controlled up to 650 C) and last with the highest capacity Leister hot air blower
Hotwind S (temperature electronically controlled up to 800 C). Hot air can be
used successfully in a wide variety of processes and techniques. Depending on
the required temperature, static and dynamic pressure, air velocity and air
volume the appropriate hot air blowers or heaters with suitable blowers can
be combined and installed. By the use of various nozzles and reflectors, the
hot air can be concentrated, spread or even sharply reduced without any significant
loss of temperature. The temperature of the of the hot air can depending on
the model, be steplessly controlled from ambient temperature to maximum 900
degree centigrade by means of built in or external electronic control. All heaters
and blowers have a low noise level and are suited for continuous operation and
installation in machines and equipment. These hot blowers have various applications.
They are used for drying and heating processes, shrinking and welding packaging
films and moulded parts, activating and loosening fusion adhesives, sterilizing
of packaging materials such as bottles, corks and containers, smoothening the
sugar coating on pills etc.
Contact details:
LIPI marketing
32, Nehru Nagar, 1st Link Street,
Old Mahabalipuram Road,
Kottivakkam, Chennai- 600041
Ph: 91-44-24540737, Fax- 91-44-24540924
E mail- info@lipimarketing.com
Web- www.lipimarketing.com
Cleaning Validation
Total Organic Carbon (TOC) is used to measure the total organic contamination
of water and equipment in the US and Europe for Cleaning Validation (CV). applications.
Pharma drug manufacturers looking for gains in quality and efficiency have led
to a growing interest to use Sievers Total Organic Carbon (TOC) analysers for
CV Most Pharma or Biotech facilities currently own a TOC analyser for compendial
USP water testing requirements to release purified water or water for injection
for the use in cleaning or production. Consequently, most facilities already
have a means of determining TOC for CV. TOC is a FDA accepted method that evaluates
all the carbon-contributing compounds for a given sample, providing confidence
that all equipment can be cleaned below the established cleaning criteria. TOC
analysis allows development of one method that will detect the carbon concentration
contributed by compounds, analytes or residues through direct (swab) or indirect
(rinsate) sampling methods. Potential target residues include active pharma
ingredients (APIs), product excipients, proteins, protein byproducts and cleaning
agents or components. GE Sievers TOC analysis is a fast and effective analytical
technique for CV in pharma manufacturing. This nonspecific method can be used
to test for residues of previously manufactured products, cleaning detergents,
chemicals, solvents, by products, degradants and microbial contaminants. CV
is primarily applicable to the cleaning of process manufacturing equipment in
the pharmaceutical industry. The focus of CV is those cleaned surfaces that
if inadequately cleaned, cloud potentially contaminates the product subsequently
manufactured in that same equipment. CV is not performed only to satisfy regulatory
authorities. The safety of patients is the primary objective and product contamination
presents serious liability issues for any pharma manufacturer or contract organization
Contact details:
Supriya Shetty
Skytech Systems (I), 108, Hamilton B-wing,
Off Ghodbunder Road, Thane(W) - 400 607
Tel: 022-22927171
application@skytechindia.com
Automatic single head powder filling machine
 Automatic
single head powder filling machine for accurate filling of powders and granules
in rigid containers/bottles with an accuracy upto ± 1 percent for fill
quantities over 50 gram or ± 2 percent for fill quantities upto 50 gram.
Filling capacity ranges from 5 gram to 1 kg. Output upto 2000 fills/hr. The
machine can be provided with a turn table for easy and trouble free feeding
of the bottles/containers. The machine is most suitable for filling tooth powder,
talcum powder, baby powder, dry syrups, coffee powder and food, pharma, chemicals
or cosmetic products etc. in powder form. Special model with servo motors instead
of clutch/brake unit available for better output and accuracy.
Automatic multi head powder filling machine
 Automatic
twin head powder filling machine for accurate filling of powders and granules
in container/bottles with an accuracy upto 1 percent for fill quantities over
50 gram or ± 2 percent for fill quantities upto 50 gram. Filling capacity
ranges from 5 gram to 1 kg. Output upto 4000 fills/hr. The machine is provided
with an unscrambler for easy and trouble free feeding of the bottles/containers.
The machine is most suitable for filling tooth powder, talcum powder, baby powder,
dry syrups, coffee powder and food, pharma, chemicals or cosmetic products etc.
in powder form. Special model with servo motors instead of clutch/brake unit
available for better output and accuracy.
Automatic rotary powder filling machine
 This
is a rotary machine in which the containers and the dispensing funnels rotate
together so that the powder dozed by the Augur Fillers into the funnels are
dispensed progressively. There are four Augur fillers for dispensing powders.
Since funnels are equispaced, the quantity of powder dispensed will be consistent.
Output upto 7000 fills/hr with an accuracy upto ± 1 percent for fill
quantities over 50 gram or ± 2 percent for fill quantities upto 50 gram.
The machine can be provided with a turn table or bottle unscrumbler. The machine
operation is very smooth even at high speeds. Special models with servo motors
instead of clutch/brake unit available for better output and accuracy. Various
safety interlocks are standard features of this machine. The machine can further
be linked to capping/closing machine.
Contact details:
Autopack Machines
101-G, Poonam Chambers,
Dr Annie Beant Road,
Worli, Mumbai- 400018
Tel: 24974800, 24924806, 24934406
Mobile: 9820089605
Fax: 091 22 24964926
E-mail: autopack@hathway.com
|
